Eiki A-3
Movement sensor
Instruction Manual
Package contents
Item
Qty.
Movement sensor
Manual
1
1
Wiring
Testing
Connect the terminals as shown in the
diagram to the control panel or access
port.
With the cover fitted, apply power and wait at
least 30 seconds. After this time, if there is
no movement, the LED should go out. Once
this has happened, any movement should
cause a couple of rapid flickers and the LED
should lock on for about 5 seconds.
You do not need to connect the tamper
switch terminals.
GND
+12v
Sensor
Walk around the room and check that your
movement can be reliably detected. If range
seems to be inadequate, check the position of
the PCB in the base. A higher position lowers
the angle of the detection beam.
Tamper switch
Programming your control panel
to recognise the A-3 and perform
actions
In Eiki Control System editor, select Device
Options under the Handset menu.
Alarm + -
N/C 12v
Option links
The Inactivity Timeout option allows you to
choose the number of seconds (up to 14400
seconds which is 240 minutes) after either
the last key is pressed or the A-3 sensor
detects movement. When that time expires
with no movement detected or key pressed,
the actions you choose under Edit Actions will
occur.
Option Links
For the purpose of detecting room
occupancy, we are not as concerned
about false alarms as we would be if
this were a security system. In fact,
not detecting room movement (when
people are in the room) would be more
of a problem.
After you have selected the time, click Edit
Actions. You can treat this just like the
programming of any other key.
For this reason, Long Range and
Short Pulse Count links should be
fitted. Similarly, having the LED
activate is a benefit.
For more information
Please refer to the control panel’s manual for
more information.
So for our application, fit all 3 links.
Eiki A-3 Movement Sensor manual.
Page 3
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & Österreich
Eastern Europe
EIKI CZECH spol. s.r.o.
Umělecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : [email protected]
E-Mail : [email protected]
Eiki (Shanghai) Co., LTD
Japan & Worldwide
1. Dapu Road,
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Golden Magnolia Plaza
#2109 Shanghai,
200023 China
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-mail : [email protected]
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
E-Mail : [email protected]
For the latest software and information go to:
Eiki A-3 Movement Sensor manual.
Page 4
|