Mighty Mite®
Household Type
Vacuum Cleaner
Owner’s Guide
3670-3695 Series
®
IMPORTANT
Do not return this product to the
store.
For assembly problems or questions
contact: Eureka’s Customer Service Division
toll free at 1-800-282-2886*, 8 a.m. to 7:30
p.m., (CST), Monday - Friday and 10 a.m. to
6:30 p.m. Saturday.
For replacement of broken or missing
items to be shipped direct to you, call 1-800-
438-7352*, 8 a.m. to 4:45 p.m., (CST),
Monday - Friday.
To order replacement parts and
accessories call 1-800-438-7352*, 8 a.m. to
4:45 p.m., (CST), Monday - Friday or visit our
*En Mexico llame al 5670-6169.
Please Retain
We suggest you record the model, type and serial numbers
below. They are located on the silver rating plate on your
cleaner.For prompt and complete service information, always
refer to these numbers when inquiring about service.
Index
Important Information ...2
Assemble......................3
Use ...............................3
Accessories ..................3
Filter .............................4
Cloth Dust Bag .............4
Troubleshooting ............5
Warranty .......................5
Model&Type___________________________
Serial No. ______________________
It is also important to keep your receipt as proof of date of
purchase.
©2003 White Consolidated, Ltd.
Printed in U.S.A.
Part No. 73154 (6/03)
ASSEMBLY
CAUTION: Moving parts. Make sure on/off switch is in
off position before plugging in.
How to Attach Mounting Bracket and Hose
Storage Bracket to Wall (on some models)
Danger: When located in a garage install at least 18
inches (450mm) above floor level. This
equipment incorporates parts such as switches,
motors or the like that tend to produce arcs or
Push ON/OFF Switch (A thermostat automatically shuts
the motor off if it overheats, see Automatic Motor Shut-
Off)
3
sparks that can cause an explosion.
ON/OFF Switch
Mount on a wall where there are no dangerous objects hidden
beneath the wall surface like electrical wires, pipes, etc.
To use cleaner when mounted on wall bracket, mount bracket
within reach of an electrical outlet.The hose storage bracket
can be located anywhere since the hose is removed from the
cleaner for storage.
Cleaning Accessories
Slip the circular end of an accessory tool onto the end of the
hose handle and twist slightly to secure. If additional reach is
needed, place a wand on the hose handle first.
1
Hold brackets against wall to
mark location for the two
screws. Position the brackets
against the wall as shown.
Use a 3/16” drill bit for drilling
holes for the two plastic
anchors.
Mounting
Bracket
Attach wands and cleaning tools
2
3
Insert the anchors.Line up the
bracket with the anchors.
Hose Storage
Bracket
4 Use a screwdriver to drive the
screws into the anchors to
secure the bracket.
Open the Slip
Ring to reduce
suction.
How to Mount your Vacuum Cleaner on Wall
Bracket
5 Turn the rotating wheel so it faces
downward.
CreviceTool
6 Hook the wheel over the v shaped
rail at the top of the mounting
bracket and let vacuum rest against
the wall.
7
Plug the vacuum into an electrical
outlet.
Caution: Unplug cleaner when not in
use.
HOW TO USE
CombinationTool
Deluxe Floor
Nozzle
1
Connect Hose.
Crevice Tool: For crevices, corners, baseboards, between
cushions.
CreviceTool
2
StoreTools
Combination Tool: One tool with bristles for dusting, and
Combination
Tool
nozzle for floors and upholstery.
Deluxe Floor Nozzle: For any type of hard surface floor.
3
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to
routine maintenance. To avoid unnecessary service calls,
check the hose, cloth bag and motor filter often. Clear a
clogged hose with the blower, empty the bag if it is full, and
clean the motor filter when it is dirty.
How to Check and Clean Motor Filter
NOTE: Turn off vacuum and unplug the electrical cord
before emptying cloth bag or cleaning motor
filter. Never operate the vacuum cleaner without
the cloth bag or filter.
Cloth Dust Bag and Filter
The cloth dust bag and motor filter play a very important roll
in the efficiency of the vacuum cleaner. The purpose of the
cloth dust bag is to trap dirt. If the bag or the motor filter
become clogged, no air can pass through the cleaner and
no cleaning can take place regardless of how powerful the
unit is. To keep the cleaner operating at maximum
efficiency, empty the cloth dust bag frequently and clean
the filter as needed. Some fine particles can restrict airflow
very quickly and will decrease performance even before the
cloth dust bag appears to be full. For that reason, when
vacuuming carpet fresheners or cleaners, powder, plaster
dust, or similar fine substances, the cloth bag needs to be
emptied and the filter needs to be cleaned or replaced
more often.
1
2
Turn off and unplug cleaner.
Open bag cover by pushing latch and lifting lid.
Latch
How to Empty the Cloth Bag
NOTE: Turn off vacuum and unplug the electrical cord
before changing cloth bag or cleaning motor
filter. Never operate the vacuum cleaner
without the cloth bag or filter.
1 Turn off and unplug cleaner.
2
Open lid by pushing down on hood latch and lifting lid.
Latch
3
4
Remove cloth bag.
Remove the motor filter.
3
To empty cloth bag, hold bag over a waste container and
slide the bottom clamp off the cloth bag. Shake debris
into waste container. Reposition plastic clamp at base of
cloth bag.
Motor Filter
NOTE: Do not get the cloth bag wet.
Plastic Clamp
Clean motor filter by brushing over a waster container or
by vacuuming with another vacuum.
5
6
If heavily soiled, clean by rinsing under warm water and
let air dry
7
8
Replace bag in cleaner.
Check the motor filter and if necessary, clean. Reinstall
the cloth bag and close bag cover.
4
Swing bag cover closed and push to latch.
4
PROBLEM SOLVING
NOTE: Turn OFF the power switch and unplug the
electrical cord before servicing.
THE EUREKA LIMITED WARRANTY
hat This Warranty Covers
W
Your Eureka cleaner is warranted to be free from all defects in material and
workmanship in normal household use for a period of one year. The warranty
is granted only to the original purchaser and members of his or her immediate
household. The warranty is subject to the following provisions.
PROBLEM
SOLUTION
Motor won’t start. • Push plug securely into outlet.
• Try another outlet.
hat This Warranty Does Not Cover
• Check circuit breaker.
• Make sure power switch is “ON”.
W
• Parts of the cleaner that require replacement under normal use, such as
disposable dust bags, filters, drive belts, light bulbs, brush roll bristles,
impellers and cleaning.
• Damages or malfunctions caused by negligence, abuse, or use not in
accordance with the Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of other than
Genuine Eureka parts.
No suction at
end of hose.
• Replace bag.
• Remove any clogs from hose that restrict
air flow, then try again.
• Check front cover and push until it latches
firmly.
hat The Eureka Company Will Do
W
The Eureka Company will, at its option, repair or replace a defective cleaner
or cleaner part that is covered by this warranty. As a matter of warranty policy,
the Eureka Company will not refund the consumer’s purchase price.
Reduced suction • Replace bag.
• Rotate slip ring on wand until hose is
covered.
arranty Registration
W
• Remove any clogs from hose that restrict
air flow, then try again.
Please fill out and return the warranty registration card accompanying your
cleaner.
btaining Warranty Service
O
Cleaner shuts off. • Unplug cleaner and check for obstructions
in hose, wands and attachments.
• Check for full bag.
To obtain warranty service you must return the defective cleaner or cleaner
part along with proof of purchase to any Eureka Authorized Warranty Station.
You will find the nearest location in theYellow Pages, under “Vacuum Cleaners–
Service and Repair.” Be certain that the Warranty Station is “Eureka
Authorized.”
• Clean/replace motor filter.
For the location of the nearest Eureka Authorized Warranty Station or for
800-282-2886, Mexico: 5670-6169, Canada: 1-800-282-2886.
If you prefer, you can write to The Eureka Company, Service Division, 807
North Main Street, Bloomington, Illinois 61701, USA. In Canada write to
The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty
repair, you must pay the shipping charges to the Eureka Authorized Warranty
Station.
General
questions.
• Call 1-800-282-2886 between 8 a.m. to
7:30 p.m. (CST) Monday - Friday and 10
a.m. to 6:30 p.m. Saturday. Know the
model number and serial number when
you call.
Return shipping charges will be paid by the Warranty Station. When returning
parts for repair, please include the model, type, and serial number from the
data plate on the cleaner.
urther Limitations and Exclusions
F
Any warranty that may be implied in connection with your purchase or use of
the cleaner, including any warranty of Merchantability or any warranty for
Fitness For A Particular Purpose is limited to the duration of this warranty.
Some states do not allow limitations on how long an implied warranty lasts,
so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly
provided above. In no event shall Eureka be liable for any consequential or
incidental damages you may incur in connection with your purchase or use
of the cleaner. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights
which vary by state.
uestions & Answers about Genuine Eureka Products
Q
Q: Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka
vacuum cleaner?
A: Using Genuine Eureka Products, which are made to our exacting specifications
and engineered with emphasis on quality, performance, and customer
satisfaction, ensures the long life and cleaning efficiency of your vacuum cleaner.
Q: How can I be sure I am using only genuine Eureka products in my vacuum cleaner?
A: Typically, packaged products and paper bags are labeled “Genuine Eureka
Product”.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka
paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and
reliability.
For Genuine Eureka Value, Accept No Imitations!
THE EUREKA COMPANY
Bloomington, Illinois 61701
5
|