RGB SCALERS
IN1401
RGB Video Scaler
(Uses Inline RS-232 Control Protocol; Available in Black Only)
horizontal and vertical centering, and individual red, green, and blue gain.
RS-232 control — A rear panel, RS-232 control port provides connection of
the IN1401 to a third-party control system.
Rack-mountable — The IN1401 is housed in a 1U, half rack width metal
enclosure.
•
•
•
Internal international power supply
MODEL
PART #
60-728-01
60-728-02
LIST PRICE
$1,850.00
IN1401
IN1401 with RS-232
$1,950.00
DESCRIPTION
OPTIONAL ACCESSORIES
The Inline IN1401 is an advanced RGB video scaler from Extron that accepts
RGB signals at scan rates from 15 to 60 KHz and resolutions up to 1024 x 768
and uses advanced digital video scaling technology to upconvert the signals to
standard resolutions and refresh rates. The IN1401 is an upconverter only — it
cannot downscale to lower resolutions. The IN1401 can act as a bridge between
the installed base of proprietary process control systems and modern data
displays. Because the unit accepts a wide range of standard and non-standard
analog video signals, and converts them to standard resolutions and refresh rates,
it allows obsolete, long-persistence phosphor monitors to be replaced with
standard monitors and flat panel displays. The IN1401 also provides enhanced
ergonomics by converting 50 Hz and 60 Hz input signals to higher, flicker-free
refresh rates.
SVHS 6' (1.83 m) S-video cable ....................26-316-02 (page 524)
$12.00
SPECIFICATIONS
VIDEO INPUT
Number/signal type ...................................... 1 RGBHV, RGBS, RGsB
Connectors .................................................. 5 female BNC
Nominal level................................................ 0.7 Vp-p for RGB
Minimum/maximum levels ............................ Analog: 0V to 1.0 Vp-p with no offset
Impedance .................................................. 75 ohms
Horizontal frequency .................................... 15 kHz to 60 kHz
Vertical frequency ........................................ 50 Hz to 120 Hz
Resolution range .......................................... 640 x 480 to 1024 x 768
VIDEO PROCESSING
Digital sampling............................................ 8 bit, 24 bits per color
Colors .......................................................... 16 million
The IN1401 offers a wide range of output resolutions to match the optimum or
native resolution of virtually any display device. Output refresh rates of 60 Hz to
120 Hz are also selectable. When used with LCD and DLP™ displays, the 60 Hz
output setting is recommended. A progressive scan RGBHV output signal is
available at standard VGA resolutions, ensuring exceptional image quality with a
wide range of CRT, LCD, DLP™, D-ILA®, LCoS, and plasma display devices.
The output resolution can also be set for HDTV 720p.
VIDEO OUTPUT
Number/signal type ...................................... 1 scaled RGBHV
Connectors .................................................. 1 female 15-pin HD
Nominal level................................................ 0.7 Vp-p for RGB
Minimum/maximum levels ............................ 0V to 0.7V Vp-p
Impedance .................................................. 75 ohms
Scaled resolution .......................................... 640x4802,4,5,6,7,8, 800x6002,4,5,6,7,8, 852x4802,4,5,6,7,8
,
1024x7682,4,5,6,7, 1152x8642,4,5,6, 1280x7202,4,5,6,7 (HDTV
720p), 1280x7681,2,3, 1280x10242,4,5, 1365x7682,4,5,6
1365x10242
,
On-screen menus provide easy control for input and output signal adjustments
as well as advanced settings. System Info is a menu option that uses the on-
screen display to show information about the input and output signals.
1 = at 56 Hz, 2 = at 60 Hz, 3 = at 65 Hz, 4 = at 72 Hz, 5 = 75
Hz, 6 = 85 Hz, 7 = 96 Hz, 8 = at 100 Hz, 9 = at 120 Hz
SYNC
Input type .................................................... RGBHV, RGBS, RGsB
Output type .................................................. RGBHV
The Blue Screen feature provides a full screen blue image for set up and testing
purposes. The blue screen output signal (activated via on-screen menu) is always
available, even when the input signal is missing or the input settings are
incorrectly adjusted. Blue screen is ideal for setting up the output resolution,
refresh rate and position settings, and to verify connection to the output display
device.
Input level .................................................. 0V to 5.0 Vp-p
Output level ................................................ 0V to 5.0 Vp-p, unterminated
Input impedance .......................................... 75 ohms
Output impedance ...................................... 75 ohms
Max input voltage ...................................... 5.0 Vp-p
Polarity ........................................................ Positive or negative (switch-selectable)
CONTROL/REMOTE
Serial control port ........................................ RS-232, female 3-pole captive screw connector
Program control............................................ lCS100 (Inline Control Software)
FEATURES
GENERAL
•
Input and output — Five BNCs are available for RGsB, RGBS, or RGBHV
input, while a female 15-pin HD connector is available for RGBHV output.
Accepts standard and non-standard video input signals.
Upconverts signals to desired resolutions and refresh rates (no downscaling).
Scaled output rates — Resolutions from 640 x 480 up to 1365 x 1024 allow
the IN1401 to match the optimal or native resolution of virtually any display.
Picture controls — The IN1401 includes a comprehensive selection of video
adjustments including brightness, contrast, horizontal and vertical sizing,
Power .......................................................... 100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal,
autoswitchable
Rack mount.................................................. Yes, with optional rack shelf
Enclosure type ............................................ Metal
Enclosure dimensions .................................. 1.7" H x 8.5" W x 7.3" D (1U high, half rack width)
4.3 cm H x 7.3 cm W x 18.5 cm D
•
•
•
(Depth excludes connectors.)
Product weight ............................................ 2.0 lbs (0.9 kg)
Shipping weight .......................................... 4 lbs (2 kg)
Listings/Compliances .................................... ETL (UL1950), CE
Warranty .................................................... 3 years parts and labor
•
414
USA
714.491.1500 (800.633.9876)
Asia +65.6383.4400
Japan +81.3.3511.7655
Europe +31.33.453.4040 (+800.3987.6673)
Copyright © 2005 Extron Electronics. All rights reserved. PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
|