Sp e cifica t io n s
Sp e cifica t io n s, co n t ’d
picture detail. It may be appropriate to change the switch
position after changing the position of the Over/ Under switch.
Ge n e ra l
Power ............................................. 100VAC to 240VAC, 50/ 60 Hz, 15 watts, internal,
auto-switchable
Signal Lock LED — When lit, the Signal Lock LED indicates that
the input signal is within the range (800 x 600) of the VSC 50;
when blinking, it indicates that the signal is out of range; when
off, it indicates that no signal is present.
12
Temperature/ humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to
90%, non-condensing
User’s Guide
Operating +32° to +122°F (0° to +50°C) / 10% to
90%, non-condensing
Rack mount ................................... No
Enclosure type .............................. Metal
Sp e cifica t io n s
Vid e o in p u t
Enclosure dimensions ................. 2.25" H x 9.00" W x 6.25" D
5.72 cm H x 22.86 cm W x 15.88 cm D
Number/ signal type ................... 1 VGA, 1 Mac analog RGBHV, RGBS, RGsB
Connectors .................................... VGA ........... 15-pin HD female
Mac............. 15-pin D female
(Add 0.5” for front panel knobs and 0.75” for rear
panel connectors.)
Shipping weight .......................... 6 lbs (2.7 kg)
Nominal level(s)........................... Analog ....... 0.7V p-p
Minimum/ maximum level(s) .... Analog ....... 0V to 2V p-p with no offset
Impedance .................................... High Z or 75 ohms (DIP switch-selectable)
Horizontal frequency .................. Autoscan 24 kHz to 48 kHz
Vertical frequency ....................... Autoscan 50 Hz to 120 Hz
Resolution range .......................... Autoscan 560 x 384 to 832 x 624
Vibration ....................................... NSTA 1A in carton (National Safe Transit
Association)
Approvals ..................................... UL, CUL, CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
Vid e o p ro ce ssin g
Encoder ......................................... 10 bit digital
Digital sampling .......................... 24 bit, 8 bits per color; 40 MHz
Colors ............................................ 16.8 million
Vertical filtering ........................... 2 levels
In clu d e d a n d Op t io n a l Ca b le s a n d Ad a p t e rs
• HV/ VGA male-to-male adapter
• SVHS 6’ S-video cable (6 feet/ 1.8 meters)
• SHR 1-6’ Super High Resolution cable
• RCA-6’ male-to-male cable
Included
Included
Optional
Optional
Optional
26-462-01
26-316-02
26-383-12
26-345-01
10-264-01
Vid e o o u t p u t
Number/ signal type .................. 1 S-video .................... NTSC, 15.75 kHz, 525 lines,
or PAL, 15.5 kHz, 625 lines
• BNC male to RCA female adapter
....................................................... 1 composite video ...... NTSC, 15.75 kHz, 525 lines,
or PAL, 15.5 kHz, 625 lines
FCC Cla ss A No t ice
Connectors ................................... S-video ....................... 1 4-pin mini-DIN female
Composite video ...... 1 BNC female
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Nominal level ............................... 1.0V p-p
Impedance .................................... 75 ohms
Syn c
Input type ..................................... Autodetect RGBHV, RGBS, RGsB
Standards ...................................... NTSC 3.58 and PAL
Input level ..................................... 1.5V to 5.0V p-p
Input impedance .......................... 75 ohms
VSC 50
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables
must be used with the unit to ensure compliance.
Computer-to-video Scan Converter
Extron Electronics, Europe
Extron Electronics, Asia
Extron Electronics Information
Extron Electronics, USA
™
Beeldschermweg 6C, 3821 AH Amersfoort 135 Joo Seng Rd. #04-01, PM Industrial Bldg.
+31.33.453.4040 FAX +31.33.453.4050 +65.383.4400 FAX +65.383.4664
1230 South Lewis Street, Anaheim, CA 92805
800.633.9876 714.491.1500 FAX 714.491.1517
USA
68-421-01 C
Printed in the USA
10 00
™
ExtronFAX
:
714.491.0192
The Netherlands
Singapore 368363
24-hour access—worldwide!
© 2000 Extron Electronics. All rights reserved.
4
VSC 50 Scan Converter • Specifications
|