ELECTRONIC OVEN CONTROL
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
Convection
Bake— Use to
select the
Convection
Bake feature.
Speed
Oven Interior
Light— Used to turn Convert— Use to
oven interior light
ON and OFF.
Convection
Clean— Use to
select the Self-
Clean feature.
ClearOff— Used to clear
any function previously
entered except the time of
day and minute timer. Press
STOP CLEAR to stop
cooking. Also the STOP
CLEAR pad is used to
activate oven lockout setting.
Clean— Use
to select the
Speed Clean
feature.
select the Convection
Convert feature.
Bake—Used to
select the bake
function.
Bake Time— Used
to enter the length of
the baking time.
Clock— Used to
set the time of day.
Preheat—Used
to preheat the
oven.
Even-Cook Convection Ovens
Lower Oven
Upper Oven
P
P
A
M
R
B
R
B
Conv
bake
Pre
heat
Speed
clean
Conv
bake
Pre
Speed
clean
Bake
time
Oven
light
Bake
time
Oven
light
heat
P
M
C
O
N
V
B
T
R
O
IL -
P
R
E
C
O
N
V
B
T
R
O
IL -
P
R
E
D
E
L
A
Y
IM
E
D
B
A
K
E
D
E
L
A
Y
IM
E
D
B
A
K
E
O
N
1
2
O
N
C
LE A
N
LO C
K
C
LE A
N
O
V
E
N
T
O
P
O
N
T
IM
E
R
C
L L
E
A
N
O
C
K
UPPER OVEN
LOWER OVEN
Conv
Clear
/Off
Conv
Clear
/Off
Start
time
Start
time
Bake
Broil
Bake
Broil
Clean
Clean
convert
convert
Clock
Controls
4
9
5
0
Controls
1
6
2
7
3
8
Maxx
clean
Keep
warm
Maxx
clean
Keep
warm
Conv
roast
Conv
roast
START
START
Timer
On/Off
Convection
Maxx Clean— Start — Use to
Timer On/Off — Used to set or cancel
the minute timer. The minute timer
does not start or stop cooking. Also,
TIMER SET/OFF Pad is used to set
the Continuous Bake Feature.
Start Time — Used to
set the desired start time
for baking. May be used
with COOK TIME to
program a delayed bake
cycle.
Roast— Use
to select the
convection
Use to select
start all oven
the Maxx
features (not used
Clean feature. with Oven Light).
roasting mode.
Broil— Used to Warm & Hold—
0 Thru 9 Number Pads—
Use to enter temperature
and times.
select the
variable broil
function.
Used to set the
Warm & Hold
feature.
Minimum and Maximum Control Pad Settings
Allofthefeatureslistedbelowhaveminimumandmaximumtimeortemperaturesettingsthatmaybeenteredintothecontrol.
An ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the
maximum settings for the feature.
FEATURE
PREHEAT TEMP.
BAKE TEMP.
BROIL TEMP.
KITCHEN TIMER
MINIMUMVALUE
170°F/77°C
170°F/77°C
400°F/204°C
0:01 Min.
MAXIMUMVALUE
550°F/288°C
550°F/288°C
Versión en español
Sideseaobtenerunacopiaen
español de este Manual del
Usuario, sírvase escribir a la
dirección que se incluye a
continuación. Solicite la P/N
318200133E.
HI-550°F/288°C
11:50Hr./Min.
11:50Hr./Min.
12:59Hr./Min.
23:59Hr./Min.
11:50Hr./Min.
11:50Hr./Min.
550°F/288°C
12Hr.
24Hr.
12Hr.
24Hr.
0:01 Min.
CLOCK TIME
1:00 Hr./Min.
0:00 Hr./Min.
0:01 Min.
0:01 Min.
325°F/163°C
300°F/149°C
OVEN COOK TIME 12Hr.
24Hr.
CONVECTIONBAKE
CONVECTIONROAST
SpanishOwner'sGuides
FrigidaireCompany
P. O. Box 9061
550°F/288°C
Dublin,Ohio 43017-0961
318200133 (0407) Rev.A
1
Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
Timer
Clean
The KITCHEN TIMER
and CLEAN
pads control the Continuous Bake or 12 Hour Energy Saving features. The
On/Off
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is
left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous
Baking.
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
PRESS
DISPLAY
T
IM E R
Timer
Timer
1. Press and hold
for 7 seconds (Figure 1). After 7 seconds
for 7 seconds
On/Off
On/Off
Figure 1
Figure 2
Figure 3
Figure 4
"Off 12Hr Off will appear in the display (Figure 2).
Clean
Clean
2. Press
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "On 12Hr On" (Figure 3) in the
display indicates the control is set for the 12 Hour Energy Saving
mode and "Off 12Hr Off" indicates the control is set for the
Continuous Bake feature (Figure 2).
START
Clear
or wait 5 seconds to accept the change.
/Off
START
3. Press
or
(Figure 4; display will return to time of day).
Clear
or
/Off
Setting KitchenTimer
Timer
TheKITCHENTIMER
padcontrolstheKitchenTimerfeature. TheKitchenTimerservesasanextratimerinthekitchen
On/Off
that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to “Minumum and Maximum Control Pad Settings” for time amount settings.
INSTRUCTIONS
PRESS
DISPLAY
To set the KitchenTimer (example: 5 minutes)
Timer
Timer
1. Press
. "0:00" will appear and "TIMER" will flash in the
On/Off
On/Off
T
I R
M
E
display (Figure 5).
Figure 5
Figure 6
Figure 7
2. Press the number pads to set the desired time in the display
(example 5 ). Press START . The time will begin to count down with
START
T
I R
M
E
START
"5:00" and "TIMER" will stay in the display (Figure 6). Note: If
is not pressed the timer will return to the time of day.
3. When the set time has run out, ":00" and "TIMER" will show in the
T
IM E R
Timer
On/Off
Timer
display (Figure 7). The oven will beep until
is pressed.
On/Off
To cancel the KitchenTimer before the set time has run out
Timer
Press
twice until the clock displays ":0:00" and "TIMER". The
On/Off
display will return to the time of day.
3
Consumer Defined Control
Note:TheConsumerDefinedControlfeaturesareadjustmentstothecontrolthatwillnotaffectcookingresults.Theseinclude
the Oven Lockout, Temperature Display and Silent Control Operation features
Setting Oven Lockout Feature
Clear
/Off
The
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the Oven from being turned on. It does not disable the interior oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate the Oven Lockout feature
Clear
/Off
Clear
/Off
for 3 seconds
1. Press and hold
for 3 seconds (Figure 1).
LO C
K
L
O
C
K
2. After 3 seconds "Off" will appear in the display and a beep will
sound. Once the oven door is locked "LOCK" will appear in the
display (Figure 1).
Figure 1
To reactivate normal oven operation:
LO K
C
LO
C
K
Clear
Figure 2
1. Press and hold
for 3 seconds. A beep will sound. "Off" will
/Off
Clear
/Off
for 3 seconds
disappearfromthedisplayand"LOCK"willstayuntiltheovendoor
has completely unlocked (Figure 2).
2. The wall oven is again fully operational (Figure 3).
Figure 3
Setting Silent Control Operation
Start
time
Clean
The STARTTIME
and CLEAN
pads control the Silent Control operation feature.The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
Figure 4
Figure 5
Start
time
Start
time
hold
for 7 seconds. "On bEEp On" will appear in the display
(Figure4).
for 7 seconds
Clean
2. Press
to switch between normal sound operation and silent
Clean
operation mode. The display will show either "On bEEp On"
(Figure 4) or "Off bEEp Off" (Figure 5).
If "On bEEp On" appears (Figure 4), the control will operate with
normal sounds and beeps. If "Off bEEp Off" appears (Figure 5),
the control is in the silent operation mode.
START
START
3. Press
or wait 5 seconds to accept the change.
4
Consumer Defined Control Features
SettingTemperature Display — Fahrenheit or Celsius
Broil
Clean
The BROIL
and FLEX CLEAN
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
PRESS
DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
Broil
Broil
1. To tell if the display is set for Fahrenheit or Celsius press
B
R
O
IL
(figure 1) and hold for 7 seconds; Wait untill "F" or "C" appears.
If "F" appears, the display is set to show temperatures in
Fahrenheit (Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
for 7seconds
Figure 1
Figure 2
Figure 3
Clean
Clean
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure3).
Clear
/Off
Clear
/Off
START
START
3. Press
or
or wait 5 seconds to accept the change.
or
5
Setting Oven Controls
Setting Preheat
Pre
Heat
The PREHEAT
pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then
indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary
when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F
(77°Cto288°C).
INSTRUCTIONS
PRESS
DISPLAY
To set the Preheat temperature for 350°F
1. Arrange the interior oven racks.
Pre
Heat
Pre
Heat
2. Press
. "- - - °" and "BAKE" will appear in the display
B
A
K
E
(Figure1).
Figure 1
Figure 2
3. Press
5
. "350°" and "BAKE" will appear in the display
3
0
5
3
0
(Figure2).
B
A
K
E
4. Press START . "PRE", "BAKE" and "
" will appear in the display
START
O
N
P
R
E
-
as the oven heats and reaches 350°F (Figure 3).
B
A
K
E
O
N
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will beep and the "PRE" light will turn off
and oven temperature will be displayed (Figure 4). If you missed
hearingthebeep,youcantellthatovenhasreachedpreheattemperature
if "PRE" has disapeared from the display. Once the oven has
preheated, PLACE FOOD IN THE OVEN. The "BAKE" light will stay
on.
Figure 3
B
A
K
E
O
N
Figure 4
Clear
/Off
Clear
Press
when baking is complete or to cancel the preheat feature.
/Off
To change Preheat temperature while oven is
preheating (example: changing from 350 to 425°F)
If it is necessary to change the preheat temperature while the oven is
preheatingtotheoriginaltemperature:
P
R
E
-
B
B
B
A
A
A
K
K
K
E
E
E
O
N
N
N
Pre
Heat
Figure 5
Pre
1. While preheating, press
(Figure5)
. "BAKE" will flash in the display
Heat
P
R
E
-
O
2. Enter the new preheat temperature. Press 4
and "BAKE" will appear in the display.
5 . "425°"
2
4
5
2
Figure 6
3. Press START . "PRE" and "
" will appear in the display as the
START
O
O
N
Figure 7
oven heats to 425°F (Figure 6). A beep will sound once the oven
temperature reaches 425°F and the display will show "425°" and
"BAKE"(Figure7).
Clear
/Off
Clear
/Off
4. When baking is complete press
.
6
Setting Oven Controls
Setting Bake
Pre
Bake
The BAKE
pad controls normal baking. If preheating is necessary, refer to the
Preheat Feature for instructions.
Heat
The oven can be programmed to bake at any temperature from 170° F to 550° F (The sample shown below is for 350°F).
INSTRUCTIONS
PRESS
DISPLAY
To set the BakeTemperature to 350°F
1. Arrange interior oven racks and place food in oven.
B
A
K
E
Bake
Bake
2. Press
, "- - - °" will appear and "BAKE" will flash in the
Figure 1
Figure 2
display (Figure 1).
3. Press
5
(Figure 2). "BAKE" will continue to flash
3
0
5
3
0
and "350°" will appear in the display.
B
A
K
E
4. Press START . "PRE", "BAKE" and "
" will appear in the
START
O
N
display as the oven heats to 350°F (Figure 3). A beep will sound
once the oven temperature reaches 350°F. The display will
show"350°"and"BAKE"(Figure4).
P
R
E
-
B
A
K
E
O
N
Clear
/Off
Figure 3
Clear
Pressing
will cancel the Bake feature at any time.
/Off
B
A
K
E
To change the BakeTemperature (example:
changing from 350° to 425°F)
1. After the oven has already been set to bake at 350°F and the
O
N
Figure 4
Figure 5
Figure 6
Bake
Bake
oven temperature needs to be changed to 425°F, press
B
A K E
O
N
(Figure 4) and "BAKE" will flash in the display.
2. Press 4
"425°" and "
5 (Figure 5). "BAKE" will continue to flash
2
4
5
2
" will appear in the display.
O
N
B
A K E
O
N
START
3. Press START . "BAKE" and "425°" will stay in the display (See
Figure6).
Clear
/Off
Pressing
will cancel the Bake feature at any time.
7
Setting Oven Controls
Setting Convection Bake
BenefitsofConvectionBake:
—Some foods cook up to 30% faster,
saving time and energy.
—Multiple rack baking.
—No special pans or bakeware needed.
Conv
bake
The CONVECTIONBAKE
padcontrolstheConvectionBakefeature. Use
the Convection Bake feature when cooking speed is desired. The oven can be
programmedforConvectionbakingatanytemperaturebetween 325°F(149°C)
to 550° F (288° C).
Convectionbakingusesafantocirculatetheoven'sheatevenlyandcontinuously
withintheoven.Thisimprovedheatdistributionallowsforfast,evencookingand
browningresults.Italsogivesbetterbakingresultswhenusing2or3racksatthe
same time. Breads and pastries brown more evenly. Convection Bake cooks
most foods faster and more evenly than conventional baking.
Foods for CONVECTION BAKE pad
*Decrease normal cook time by:
Frozen foods, pies, ............. 15-25%
pastries and pizza
Refrigeratorcookies ............ 15-35%
Refrigeratorbiscuits ............ 15-30%
Rolls & Breads.................... 20-25%
Fresh Pies/Pastries ............ 10-20%
General Convection Bake Instructions
1. WhenusingConvectionBake,decreaseyournormalcookingtimesasshown
aside.Adjustthecooktimefordesireddonenessasneeded.Timereductions
willvarydependingontheamountandtypeoffoodtobecooked.Cookiesand
biscuits should be baked on pans with no sides or very low sides to allow
heatedairtocirculatearoundthefood.Foodbakedonpanswithadarkfinish
will cook faster.
2. PreheatingisnotnecessarywhencookingcasseroleswithConvectionBake.
3. When using Convection Bake with a single rack, place oven rack in position
2 or 3. If cooking on multiple racks, place the oven racks in positions 2 and
3.
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommendedreductionincooktimes
based on brands of food items tested.
Cook times may vary with your specific
brand of food item.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven for Convection Bake and temperature to
350°F
1. Arrange interior oven racks and place food in oven.
C
O
N
V
B
A
K
E
Conv
bake
2. Press
. "CONV BAKE" will flash and "- - -°" will appear in the
Conv
bake
Figure 1
Figure 2
display (Figure 1).
3. Press
. "CONV BAKE" and "350°"will appear in the
5
3
0
5
3
0
C
O
N
V
B
A
K
E
display (Figure 2).
START
4. Press
. "CONV BAKE", "PRE" and "
" will appear in the
O
N
START
display (Figure 3).The temperature will be decreased to 325° F.
A beep will sound once the oven temperature reaches 325° F and the
C
O
N
V
P
R
E
-
B
A
K
E
O
N
Figure 3
display will show "325°", "CONV BAKE" and "
" (Figure 4).
O
N
Note: The convection fan will start AS SOON AS the oven is set for
Convection Bake.
C
O
N
V
B
A K E
N
O
Figure 4
Clear
/Off
Clear
/Off
Press
time.
to stop Convection Bake or cancel Convection Bake at any
START
Note: As soon as the
pad is pressed the set temperature will be
decreasedby25°F(14°C).
8
Setting Oven Controls
Setting Convection Roast
This method of cooking enables you to obtain the best results when roasting. Allow your oven to preheat before roasting.
A beep will let you know when the convection roast temperature is reached. The oven can be programmed to convection
roast at any temperature from 300°F to 550°F (149°C to 288°C). Remember to use tested recipes with times adjusted for
convection roasting when using the convection mode. Times may be reduced by as much as 30% when using the
convectionfeature.
INSTRUCTIONS
To Set the oven to Convection Roast at 350°F
1. Arrange oven racks.
PRESS
DISPLAY
C
O
N
V
Conv
roast
Conv
2. Press
, "- - - °" will be displayed; "CONV" will flash (Figure 1).
roast
Figure 1
Figure 2
5
3. Enter
5
using the number pads. "CONV" and "350°"
3
0
3
0
C
O
N
V
will be displayed (Figure 2).
START
4. Press START , "CONV", "PRE" and "
" will be displayed. A beep
O
N
will sound once the oven temperature reaches 350° (Figure 3).
C
O
N
V
P
R
E
-
O
N
To change the preset Convection Roast Temperature
(example:425°F)
Figure 3
C
O
N
V
P
R
E
-
Conv
roast
Conv
roast
1. Press
, "CONV" will flash.
O
N
Figure 4
2. Enter the desired roasting temperature using the number pads
(Figure 4).
4
5
2
4
5
2
START
START
3. Press
the current oven temperature, "CONV", "PRE" and
"
" will be displayed.
O
N
After the oven has reached the desired temperature, "PRE" will
diappear the control will beep and "CONV" light will stay on. The
"
" light will turn on and off as the oven maintains its temperature.
O
N
Clear
/Off
Clear
/Off
When convection roasting is complete press
.
INSTRUCTIONS
PRESS
DISPLAY
Setting Convection Convert
This function is used to convert a normal baking to a convection
baking.
P
R
E
-
B
A
K
E
O
N
Figure 5
Be sure your oven is baking in a normal baking mode (Figure 5).
C
O
N
V
B
A
K
E
Conv
convert
Conv
O
N
Press convert. "CONV" should now be displayed and the temperature
Figure 6
decreased to convection baking temperature (Figure 6).
Note: For a timed convection convert.
C
O
N
V
T
I D E
M
E
B
A
K
O
N
1
M
O
V
E
N
T
I E
After 75% of the cook time, the controll will beep 3 times and "CF"
(check food) will appear in the display (Figure 7). At this time the oven
control will sound 3 long beeps at regular intervals until baking has
finished.
Figure 7
9
Setting Oven Controls
SettingTimed Bake,Timed Convection Bake orTimed Convection Roast
Conv
bake
Conv
roast
Bake
time
Bake
The BAKE
or CONVECTION BAKE
or CONVECTION ROAST
and BAKE TIME
pads control the
Timed Bake feature. The automatic timer of the Timed Bake feature will turn the oven OFF after cooking for the desired
amount of time you selected.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven to begin baking immediately and to shut off
automatically (example : Bake at 350°F for 30 minutes)
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
B
A
K
E
Figure 1
Figure 2
Bake
5
Bake
3. Press
display (Figure 1).
4. Press
, "- - - °" will appear and "BAKE" will flash in the
B
A
K
E
(Figure 2). "BAKE" will continue to flash and
5
3
0
3
0
"350°" will appear in the display.
START
5. Press START . "PRE", "BAKE" and "350°" will appear in the
P
R
E
-
B
A
K
E
O
N
display (See Figure 3).
Figure 3
Bake
time
6. Press Bake . "OVEN 1" and "TIME" will flash; The current time
time
will change to 0 hr :00 (Figure 4).
P
R
E
-
1
B
A
K
E
7. Enter the desired baking time by pressing
.
3
0
3
0
O
N
O
V
E
N
T
IM E
Figure 4
Note: Baking time can be set for any amount of time between 1
minute to 11 hours and 50 minutes.
START
8. Press START . "PRE", "TIMED", "BAKE" and "
" should now be
O
N
displayed. Once the Timed Bake feature has started, the current
time remaining will be displayed (Figure 6).
P
R
E
-
B
A
K
E
O
N
1
T IM E
O
V
E
N
Clear
/Off
Figure 5
Clear
/Off
Press
when baking has finished or at any time to cancel the
Timed Bake feature.
P
R
E -
E
T
IM E D
B
A
KK
O
N
1
E
O
V
E
N
T
IM
When the timed bake finishes:
1. "End" and the time of day will show in display. The oven will shut
off automatically (Figure 7).
Figure 6
2. The control will beep 3 times. And "End"will remain in the display
Clear
/Off
Clear
/Off
until
is pressed.
Figure 7
NOTE: Remember that the lowest BAKE temperature is 170°F
and that the lowest CONVECTION BAKE temperature is 325°F.
UsecautionwiththeTIMEDBAKEorDELAYEDTIMEBAKEfeatures.Usetheautomatictimerwhencooking
cured or frozen meats and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry,
should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before
cookingbegins,andshouldberemovedpromptlywhencookingiscompleted.Eatingspoiledfoodcanresultinsicknessfrom
foodpoisoning.
10
Setting Oven Controls
Setting Delayed Timed Bake or Delayed Timed Convection Bake
Conv
bake
Conv
roast
Bake
time
Start
time
Bake
TheBAKE
orCONVECTIONBAKE
,CONVECTIONROAST
,BAKETIME
andSTARTTIME
pads
control the Delayed Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on and off at the time
you select in advance. Note: If your clock is set for normal 12 hour display mode the Delayed Timed Bake or Delayed Timed
Convection Bake cycle can never be set to start more than 12 hours in advance. To set for Delayed Timed Bake or Delayed
Timed Convection Bake 12-24 hours in advance set the control for the 24 hour time of day display mode.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven for a delayed BAKE start time and to shut off automatically
(example: baking at 350°F, starting at 5:30 and baking for 30 minutes)
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
B
A
K
E
E
E
Bake
5
Bake
3. Press
(Figure1).
4. Press
. "- - -°" will appear and "BAKE" will flash in the display
Figure 1
Figure 2
3
0
5
(Figure 2). "BAKE" will continue to flash and
3
0
B
A
K
"350°" will appear in the display.
START
5. Press START . "BAKE", "
" and "350°" will stay in the display.
O
N
P
R
E
-
(See Figure 3).
B
A
K
O
N
Bake
time
Bake
time
Figure 3
6. Press
. "OVEN 1" and "TIME" will flash, the current time will
change to "0 hr : 00" and "350°" will remain in the display (Figure
4).
P
R
E
-
B
A
K
E
O
N
1
T IM E
O
V
E
N
7. Enter the desired baking time using the number pads by pressing
Figure 4
3
0
. "OVEN 1" and "TIME" will flash; (Figure 5). Note: Baking
3
0
time can be set for any amount of time from 1 minute to 11 hours
and 50 minutes.
P
R
E
-
B
A
K
E
O
N
1
T IM E
O
V
E
N
Figure 5
START
8
Press START . "TIMED", "BAKE", "
" and "350°" will remain in the
O
N
display (Figure 6).
P
R
E -
E
T
I KK
M
E
D
B
A
O
N
1
T IM E
O
V
E
N
Start
time
Start
9. Press
. "OVEN 1" and "TIME" will flash in the display. Enter
time
Figure 6
5
3
0
the desired start time using the number pads 5
7).
(Figure
3
0
P
R
I
E
-
T
M
E
D
B
A
K
E
START
O
N
1
T IM E
O
V
E
N
Figure 7
10. Press START ."PRE" and "
"will disapear and "DELAY" will
O
N
appear in the display (Figure 8). When Delayed Time Bake starts,
"DELAY" will disappear and the display clock will swich to the
countdown of the oven cook time. The oven will sart to bake at the
previously selected temperature (Figure 8).
D
E
LA
Y
T
I
M
E
D
B
A
K
E
O
V
E
N
1
T
IM
E
Figure 8
Figure 9
Clear
/Off
Clear
/Off
Press
when baking has completed or at any time to cancel the
Delayed Time Bake feature.
When the set bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Figure 9).
2. The control will beep 3 times. And "End"will remain in the display
Clear
/Off
until
is pressed.
11
Setting Oven Controls
Setting the Keep Warm Feature
Keep
TheKeepWarm Warm padturnsONtheKeepWarmfeatureandwillmaintainanoventemperatureof170°F(77°C).TheKeep
Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Keep
Warm feature will shut the oven OFF. The Keep Warm feature may be used without any other cooking operations or can be
used after cooking has finished using BAKE, CONVECTION BAKE or CONVECTION ROAST.
The Keep Warm feature may be used with TIMED BAKE if you wish to have the Keep Warm feature turn ON automatically
when cooking has finished. The Timed Bake features require you to set start time and the amount of cooking time. With this
information the control can calculate the time when cooking will complete and can then start the Keep Warm feature
automatically.
INSTRUCTIONS
PRESS
DISPLAY
To set Keep Warm:
1. Arrange interior oven racks and place food in oven.
Keep
2. Press
. "- - -°" will appear in the display (Figure 1).
Warm
Figure 1
Keep
Warm
Note: If no pad is touched within 5 seconds the request to turn ON
Keep Warm feature will be cancelled.
3. Press START . "HLd" and "
" will appear in the display (Figure 2).
O
N
O
N
START
Figure 2
Clear
4. To turn the Keep Warm OFF at any time press
.
/Off
Clear
/Off
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
To set Keep Warm to turn ON automatically:
1. Arrange interior oven racks and place food in oven. Set the oven
properly for Timed Bake or Delayed Timed Bake.
Keep
Warm
Keep
Warm
P
R
E -
2. Press
. (Figure 3)
T
I D E
M
E
B
A
K
O
N
1
T IM E
O
V
E
N
Figure 3
START
3. Press START . The "HLd" will appear in the display after Timed
Bake has finished (See Figure 4).
Clear
/Off
Clear
/Off
4. To turn the Keep Warm feature OFF at any time press
.
O
N
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
Figure 4
Clear
/Off
Clear
/Off
Pressing
at any time will stop all oven baking operations.
12
Setting Oven Controls
Setting Broil
Broil
TheBROIL
padcontrolstheBroilfeature.Whenbroiling,heatradiatesdownwardfromtheovenbroilerforevencoverage.
TheBroilfeatureispresettostartbroilingat550°F;however,theBroilfeaturetemperaturemaybesetbetween400°Fand550°F.
This range includes a Searing Grill for searing meats.
The broil pan and broil pan insert used together allow dripping grease to drain and be kept away from the high heat of the oven
broiler.DONOTusethebroilpanwithouttheinsert(SeeFigure5). DONOTcoverthebroilpaninsertwithfoil. Theexposed
grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw baking
soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water can cause
a grease fire to spread and cause personal injury.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven to broil at the default setting (550°F):
1. Place the broiler pan insert on the broiler pan. Then place the food on
the broiler pan insert. DO NOT use the broiler pan without the insert.
DO NOT cover the broiler insert with foil. The exposed grease could
ignite.
B
R
O
IL
Figure 1
2. Arrange the interior oven rack and place the broiler pan on the rack.
Be sure to center the broiler pan directly under the broiler element.
Make sure the oven door is in the broil stop position (See Figure
4).
B
R
O
IL
Figure 2
Broil
Broil
3. Press
. "BROIL" will flash and "- - -°" will appear (Figure 1).
."BROIL" will continue to flash (Figure 2).
B
R
O
IL
O
N
4. press
5
5
0
5
5
0
5. If a lower broil temperature is desired (minimum broil temperature
setting is 400°F (204°C)), press the desired temperature before
continuing to step 6.
Figure 3
6. Press START . The oven will begin to broil. "BROIL", "550°" and
START
"
" will appear in the display (Figure 3).
O
N
7. Broil on one side until food is browned; turn and cook on the second
side. Season and serve. Note: Always pull the rack out to the stop
position before turning or removing food.
Broil Stop Position
Figure 4
Clear
/Off
Clear
/Off
8. To cancel broiling or if finished broiling press
.
BroilingTimes
Use the following table for approximate broiling times. Increase or decrease broiling times, or
move the broiling pan to a different rack position to suit for doneness. If the food you are broiling
is not listed in the table, follow the instructions provided in your cookbook and watch the item
closely.
Electric Range Broiling Table Recommendations
Food
Rack
Temp
Cook Time
Item
Position
Setting
1st side
2ndside
Doneness
Figure 5
Steak 1" thick
2nd
2nd
2nd
3rd
2nd
2nd
3rd
550° F
550° F
550° F
450° F
450° F
500° F
550° F
550° F
550° F
6:00
7:00
8:00
20:00
8:00
13:00
5:00
4:00
5:00
6:00
10:00
6:00
n/a
n/a
7:00
8:00
Rare
Medium
Well
Well
Well
Well
Well
Medium
Well
Pork Chops 3/4" thick
Chicken - Bone In
Chicken - Boneless
Fish
Shrimp
Hamburger 1" thick
2nd
3rd
9:00
10:00
13
Setting Oven Controls
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
Bake
time
Start
time
The BAKE TIME
and
START TIME pads are used to set the Sabbath feature. The Sabbath feature may only
Bake
be used with the
pad. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven
temperature adjustment feature should be used only during Jewish Holidays), however the display will not visibly show or
provide any audible tones indicating whether the change occurred correctly. Once the oven is properly set using Bake
with the Sabbath feature active, the oven will remain continuously ON until cancelled. This will override the factory
preset12-HourEnergySavingfeature.
Oven
light
If the oven light will be needed during the Sabbath, press
before activating the Sabbath feature. Once the oven
light is turned ON and the Sabbath feature is active, the oven light will remain ON until the Sabbath feature is turned
OFF. If the oven light needs to be OFF, be sure to turn the oven light OFF before activating the Sabbath feature.
IMPORTANT NOTES: It is not advised to attempt to activate any other program feature other than BAKE while the
Bake
Sabbath feature is active. ONLY the following key pads will function after setting the Sabbath feature;
to
,
,
0
9
Clear . ALL OTHER KEYPADS will not function once the Sabbath feature is properly activated.
/Off
START
&
INSTRUCTIONS
PRESS
DISPLAY
To Program the Oven to Begin Baking Immediately &
activate the Sabbath feature (example: baking at 350°F)
1. Be sure that the clock is set with the correct time of day.
2. Place the food in the oven.
Bake
3. Press
. "- - - °" appears in the display (Figure 1).
4. Within 5 seconds, press the
"350°F(177°C)."(Figure2).
,
,
. The display will show
5
3
0
5. Press START . The "
" indicator light will be displayed (Figure 3).
O
N
6. If you desire to set the oven control for a Timed Bake or Delayed
Start Bake do so at this time. If not, skip this step and continue to
step 6. Refer to the Timed Bake (complete steps 6-8) / Delayed Start
Bake (complete steps 6-10) section for complete instructions.
Remember the oven will shut down after using Timed Bake or Delay
Start Bake and therefore may only be used once during the Sabbath/
Jewish Holidays. The maximum Delayed Start Bake time is 11 hours
& 59 minutes.
7. The oven will turn ON and begin heating.
Bake
time
Start
time
8. Press and hold both the
and
pads for at least 3 seconds. " -
- -" will appear in the display (Figure 4). Press
14
Setting Oven Controls
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays) (continued)
INSTRUCTIONS
PRESS
DISPLAY
Note: You may change the oven temperature once baking has
S
TOP
C
LEAR
Bake
started by pressing
, the numeric key pads for the
temperature you want (example for 425°C press
,
,
)
4
5
2
4
5
2
START
START
and then pressing
(for Jewish Holidays only). Remember
that the oven control will no longer beep or display any
further changes once the oven is set for the Sabbath feature.
Clear
/Off
Clear
/Off
9. The oven may be turned OFF at any time by first pressing
pad (this will turn the oven and the Sabbath feature OFF). SAb
will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not
turn back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed
from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath.
Clear
/Off
After the Sabbath observance turn OFF the Sabbath feature by pressing
pad. SAb will disappear from the display
and the oven may be used with all normal functions. For further assistance, guidelines for proper usage, and a complete
list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org.
15
To avoid possible
Self-Cleaning
To Start the Self-Clean Cycle
Speed
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
Maxx
padscontroltheSelf-
clean
Clean
TheSPEEDCLEAN
,CLEAN
andMAXXCLEAN
clean
Cleaning feature. If you are planning to use the oven directly after a self-clean cycle
remember to allow time for the oven to cool down and the oven door to unlock. This
normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4
hours to complete.
DO NOT force the
oven door open. This can damage
theautomaticdoorlockingsystem.
Use caution and avoid possible
burns when opening the door after
the Self-Cleaning cycle has
completed. The oven may still be
VERY HOT.
Speed
clean
Clean
*It is recommend to use a
cycle (2 hour) for light soils, a
cycle (3 hour) for
Maxx
clean
average soils, and a
cycle (4 hour) for heavy soils (to assure satisfactory
results).
NOTE: During a Self-Cleaning cycle the second oven will be disabled.
NOTE: A smoke eliminator in the
oven vent converts most of the soil
into a colorless vapor.
INSTRUCTIONS
PRESS
DISPLAY
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
Clean
Clean
2. Press
. "CLEAN", "1" and "TIME" will flash in the display
C
C
C
L C
E
A
N
L
E
A
N
1
T
I
M
E
(Figure 1). The control will automatically clean for a 3 hour period
(default self-cleaning cycle time). Note: If a 2 or 4 hour clean time
Figure 1
Speed
clean
Maxx
clean
Speed
clean
Maxx
clean
is desired, press
for 2 hour or press
for a 4 hour clean
or
time. Set the cleaning time based on the amount of soil: light,
medium or heavy (* See above).
LE A
N
C
L N
E
A
1
T
I
M
E
Figure 2
START
START
3. Press
.Once the door has locked, "CLEAN", "LOCK" and
O
N
1
L N
E
A
L K
O
C
O
V
E
N
T
I
M
E
"
" will appear in the display (Figure3).
O
N
Figure 3
4. When flex clean finishes, lock will remain in the display until the
door has unlocked (Figure 4).
Note: Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
1. The time of day and "LOCK"will remain in the display (Figure 4).
2. Once the oven has cooled down for approximately 1 HOUR, and
"LOCK"isnolongerdisplayed, theovendoorcanthenbeopened
(Figure5).
LO C
K
Figure 4
Figure 5
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
Clear
/Off
Clear
/Off
1. Press
.
2. Theovendoorcanonlybeopenedaftertheovenhascooleddown
for approximately 1 HOUR, and "LOCK" is no longer displayed
(Figure5).
16
Oven Cleaning
To Start the delayed Self-Clean Cycle
Speed
clean
Maxx
clean
Start
time
Clean
The SPEED CLEAN
, CLEAN
, MAXX CLEAN
and DELAY START
pads and length of clean cycle,
controlstheDelayedSelf-Cleanoperation.Theautomatictimerwillturntheovenonandoffatthetimeyouselectinadvance.
Be sure to review TO START THE SELF-CLEAN CYCLE for recommended clean times.
INSTRUCTIONS
PRESS
DISPLAY
To set the control for the Self-Cleaning Cycle to start
at a delayed time and shut off automatically (example:
3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
C
L C
E
A
N
LE
A
N
1
T
I
M
E
Figure 1
Clean
2. Press
. "CLEAN", "
" and "TIME" will flash in the
Clean
O
N
display (Figure 1). The control will automatically clean for a 3
hour period (default self-cleaning cycle time)(Figure 2). Note: If a
C
L C
E
A
N
L
E
A
N
1
T
I
M
E
Speed
clean
Speed
clean
2 or 4 hour clean time is desired, press
for 2 hour or press
Figure 2
Maxx
clean
Maxx
clean
for a 4 hour clean time. Set the cleaning time based on the
amount of soil: light, medium or heavy.
O
N
1
C
L N
E
A
L C
O
K
O
V
E
N
T
I
M
E
4. Press START ."OVEN" will appear in the display. Once the door has
START
Figure 3
locked "CLEAN", "LOCK" and "
" will be displayed (Figure 3).
O
N
Start
time
Start
time
5. Press
. Time will be displayed."OVEN 1" and "TIME" will
O
N
1
C
L N
E
A
L
O
C
K
O
V
E
N
T
I
M
E
flash (Figure 4). Enter the desired start time using the number
pads (Figure 4).
Figure 4
4
3
0
4
3
0
6. Press START . "CLEAN", "DELAY", "LOCK", "OVEN1" and "TIME"
START
D
E
L Y
A
L
C
E
A
N
L V
O
C
K
O
E
N
1
T
I
M
E
will be displayed (Figure 5).
Figure 5
7. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"LOCK" indicator light will go on.
8. The control will start the self-cleaning at the set start time, for the
period of time previously selected. At that time, the icon
"DELAY" will go out.
Figure 6
When the Self-Clean Cycle is Completed
1. The display will return to the time of day (Figure 6).
2. Oncetheovenhascooleddownforapproximately1HOUR,theoven
door can then be opened (Figure 7).
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
Clear
/Off
Clear
1. Press
.
/Off
2. Once the oven has cooled down for approximately 1 HOUR and the "LOCK" is no longer displayed, the oven door
can then be opened (Figure 6).
Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more
than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance set the control for the 24 hour
time of day display mode.
17
Adjusting Oven Temperature
Note:The oven
The temperature in the oven has been pre-set at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven temperature is
cooking too hot or too cool for the temperature you select, you can adjust the actual
oven temperature to be more or less than what is displayed. Before adjusting, test a
recipe by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment
is needed.
temperatureadjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broiltemperature.
INSTRUCTIONS
PRESS
DISPLAY
To adjust the oven temperature higher
Bake
Bake
1. Press
for 6 seconds (Figure 1).
2. To increase the temperature use the number pads to enter the
desired offset temperature. (Example 30°F) (Figure 2).
Figure 1
Figure 2
3
0
3
0
The temperature may be increased as much as 35°F (19°C).
Clear
Clear
/Off
START
START
3. Press
or
to accept the temperature change and the
/Off
or
display will return to the time of day (Figure 3).
To adjust the oven temperature lower
Bake
Bake
Figure 3
Figure 4
1. Press
for 6 seconds (Figure 1).
2. To decrease the temperature use the number pads to enter the
desired offset temperature. (Example -30°F)
and then
3
0
Clean
3
0
Clean
press
(Figure 4). The temperature may be decreased as
muchas-35°F(-19°C).
Clear
/Off
START
or
Clear
to accept the temperature change and the
/Off
START
3. Press
or
display will return to the time of day (Figure 3).
18
Notes
19
Notes
20
|